Daewoo (DD-7098), LG BL9808, 5231JA2012A, SAMSUNG DA29-10105J) Universal Fridge water filter cartridge

THIS FILTER IS MANUFACTURED BY MICROFILTER , KOREA - THE VERY SAME COMPANY THAT MADE GENUINE SAMSUNG DA2910105J FILTER AND LG WATER FILTERS

Compatible Filters&Fridge:

l External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that haveexternally fitted cartridges replaces : The DAEWOO DD-7098 & many other filter part numbers, will fit all brandsof fridges that use an external in-line fridge filter. Most fridges with internal filters can be converted over touse these filters.

l Suitable for:External inline refrigerator water filter is a replacement cartridge for side-by-siderefrigerators that have externally fitted cartridges

l Suits the Following Fridge Models:

l Daewoo FRNU20DAI,FRNU20DAW,FRNU20DEV,FRNU20DFBI,FRNU20DFVI,FRNU20DFWI,FRNU20FAI

l ,FRNU20FCC,FRNU20FCCI,FRNU20FEV,FRNU20FFVI,FRNU20GAI,FRNU20GFBI,FRNU20GFWI

l ,FRNY22D2V,FRNY22D2W,FRS2011EAL,FRS2011IAL,FRS2030IBE,FRS2031EAL,FRS2031IAL

l ,FRS2031WAL,FRS2032IBE,FRS2041WAL,FRS2411IAL,FRS2431IAL,FRSNU20DCC,FRST20DAA

l ,FRST20DAM,FRST20DAML,FRST20DAN,FRST20DAS,FRST20FAM,FRST20FAN,FRST20FAS,

FRST22DAM

l ,FRST22FAS,FRST24FAN,FRSU20DA,FRSU20DAI,FRSU20DAV,FRSU20DCB,FRSU20DCC,

FRSU20DCI

l ,FRSU20FAI,FRSU20FAV,FRSU20GAI,FRSU21DAI,FRSU21DAV,FRSU21DCB,FRSU21DFV,

FRSU21FAI,FRSU21FAV

Fridge Water Filter Spec:

Installation and replacement procedure for the Compatible External fridge water filter :

l 1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it offand to depressurise the system draw a large glass of water from the water outlet at the fridge.

l 2. . Have a bucket and towel ready as there will be a small spillage of water during this process. Removethe old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and atthe same time pull out the water supply line. Discard the old filter.

l 3. Take the new filter, making sure the flow direction is correct and insert the inlet side only, the linewill go in approx 5 10mm and you will feel it hit home.

l 4. Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flowthrough the filter and into the bucket. This will remove any loose carbon fines. Turn off the water supplyand connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.

l 5. Complete the Replacement Due sticker and place in a visible area inside the fridge door.